Multiple Critical Projects on 7 Line Move Ahead as Major 2016 Work Scheduled

Published on : Saturday, December 19, 2015

MTA-RailThe Metropolitan Transportation Authority (MTA) has scheduled critical work in 2016 on the Flushing 7 Subway Line that will require weekend service shutdowns between Manhattan and Queens. The necessary work in 2016 requires fewer shutdowns than in previous years as reconstruction progresses and improvement projects near completion. Most of the track panel replacement work scheduled for 2016 will be on the three-track segment of the line, which will not require full suspensions of service since the presence of three-tracks allows trains to safely bypass work zones. This means fewer significant disruptions while track panel replacement continues.

MTA New York City Transit has been making capital improvements on the 7 Subway Line over the past several years to increase the line’s capacity and reliability as ridership demand rises. Nearly every element of the line is being improved, from tracks through the replacement of entire panels of elevated tracks, to signals through the implementation of an updated communications-based train control system (CBTC), to the reconstruction and fortification of the storm-damaged Steinway Tunnel that links Queens and Manhattan.
The extensive nature of the work on the Flushing Line necessitates service shutdowns to allow crews to access and work on equipment that is critical to safe train operation. The subway system’s around-the-clock operation and record ridership, particularly on the 7 Subway Line, make it challenging to restrict work to times of low ridership. NYCT is aware of the inconvenience caused by such disruptions and therefore makes every effort to schedule work around major community events such as Lunar New Year celebrations. The 2016 schedule takes into account the 2016 Lunar New Year celebration in early February and the Mets’ home game schedule when there is extra demand for service.

“The growth of the Flushing Line matters greatly to the growth of Queens, and these projects are critical to the future of the line,” said James L. Ferrara, Interim President of New York City Transit. “Replacing old tracks means a smoother, faster ride for customers, and installing a modern signal system means less crowded and more reliable commutes. Improvements to any part of our infrastructure allows us to better serve all of our customers. This work may be a short-term inconvenience now, but every repair or improvement we make is a step toward a better Flushing Line and a more reliable subway system for all.”

The major projects on the Flushing Line include the implementation of CBTC, a modern signaling system that is scheduled for completion in 2017. This multi-year $774 million capital improvement project replaces the existing 50- to 90-year-old signal system and allows for trains to run more reliably and frequently, thereby increasing line capacity and preventing problems associated with old equipment. In 2015, crews continued to install new wayside equipment including signal equipment, antennas, radio units, transponders, fiber-optic distribution panels and cable, telephone cable, and cable distribution boxes. Software was tested and installed for use at the 1st Avenue Interlocking; maintainer panels and cable servers were installed; new signal equipment along the track right-of-way was tested, and additional signal locations were prepared for future equipment installation. Workers also installed new electrical conduits, performed circuit breaker repairs, and removed old cables and signal equipment.

In 2016, contractors will continue installing and testing CBTC equipment throughout the line. Much of the work in 2016 will involve the testing of installed equipment to prepare for the system’s 2017 launch. Once completed, the new system will interface with subway cars to allow for countdown clocks, increased operational flexibility and reliability, system safety improvements and increased capacity to run more trains per hour.

NYCT also is replacing segments of tracks on elevated portions of the 7 Subway Line that are reaching the end of their useful lifespan. In 2015, NYCT replaced tracks east of 33 St-Rawson St and at certain points between Queensboro Plaza and Flushing-Main St, primarily working on three-track segments of the elevated line. In 2016, NYCT will continue this work between 46 St-Bliss St and 52 St, and outside Flushing-Main St. Such work is part of the recurring maintenance of the subway system as NYCT periodically checks every mile of track on every line and replaces tracks nearing the end of their useful lives.



Tags: ,

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

arrow2Follow TTW
facebook-logo  twitter-logo  LinkedIn_logo  stumbleupon-logo   rss_logo 
ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo


  • 01 AIME 2018 BB
  • 02 WTM 2017
  • 03 EMITT 2018
  • 04 AIME-2018 small
  • 05 iitmindia 2017
  • 06 imtm 2018
  • 06 TTF-Surat 2017
  • 07 balttour 2018
  • 30 PATA


Get our toolbar!
Review on